I made a bunch of progress but I also added to my to-do list; 🤦 I tend to do that.
First off, I finished the audio system. The rear led panel and amp were mounted. The wiring has been completed and it is ready to be mounted once the frame is painted. I have been testing it out in the Texas sun and heat to make sure we don’t have any issues on the playa.
I am considering cutting an ABS plastic sheet to make a panel to cover the gap between the LED panels and the handlebars. This image is a POC of how the audio control remote will mount in said ABS panel.
Next, I fabricated mounts for the new front panels and welded them to the forks. The mounts were made the same as the original panels, half-inch square steel tubes with one side flattened and a hole drilled into the flat side.
The same day I welded on the piano hinge that will allow the seat to flip up revealing the petrol tank, Li-ion packs, and storage. I used all my dado blades to make a wide dado in the bottom of the seat that the hinge will be recessed into. There is just enough space to let the seat open while bypassing the side LED panel.
Speaking of the side panels… the mounts for these were mostly removed with the new frame so they needed to be re-welded. The side panels were originally mounted at an angle. I felt this gave the design more motion but this time I mounted them parallel with the seat to make it more comfortable for passengers.
TODOs:
Weld driver footrest to frame
Weld Passenger Foot Pegs
Weld bottom to seat storage
Remount Headlights
Rework Rear Suspension
Paint the whole frame
Paint the motor
Finish painting the wheels
Finish cleaning up the wiring
3D Print Foot Rest Pad
Build more Li-ion battery packs (recycled cells)
Re-paint the original three pannels (maybe)